The checklist state moves from DashboardPage to OnboardingProvider, mounted
in AppShell around the routed page; pages read it through useOnboarding().
The reducer stays in useOnboardingChecklist:
- loads are numbered and a stale answer is ignored;
- HIDE, SHOW, SKIP and RESUME win over the snapshot of a load started
before them (#384);
- a refresh keeps the counters and the ready status, and a failed re-read
after a first success keeps the last state; only the start of a failure
streak is logged;
- re-read at mount, on every route change and 150 ms after a burst of
data events.
onboardingService: getOnboardingSnapshot replaces getOnboardingCounters and
is a pure read (skipped steps included, one preference per step, filtered on
the six keys and the value "1"); initializeGuidedPath applies rule D9 once
per profile in one transaction (hidden first, then the flag, ROLLBACK on
failure), awaited once by the first load through a promise shared by
StrictMode's double mount; skipStep / resumeStep are idempotent.
computeChecklist counts skipped rows; the new pure onboardingPath module
holds nextStep, CARD_PAGES (empty for now), stepsOfPage, the card latch,
bannerMode and readOnboardingNavState. The dashboard reads the context and
keeps its compact bar for now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Follow-ups of the three /pr-review passes on #386, #387 and #388, applied
on the stack head before the fast-forward merge:
- #386: pin the relay of the revoked state by revocationCheckLauncher
(a launcher passing false instead of wasRevoked passed the whole suite),
and say in the rate budget comment that two checks in one minute bring
the machine-limit path to 6 requests.
- #387 S1: the fake `t` of the removal tests and of the License card tests
marks what it translates, so a string that skipped `t` fails its test.
- #387 S2: pin that storing another key stops on Storage while the
previous token cannot be dropped, the previous key staying.
- #387 S3: reload the license context after a failed removal too. Rust
deletes the key first, so a token that resisted left the key gone while
the card kept showing it under "the key was not removed".
- #388: pin that an unreadable token stays (the directory case could not
tell, its deletion fails anyway).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"Remove the key" on the License card removes license.key, then the
activation token, and keeps license.check, so a revoked key removed then
entered again stays Free. Removing the key stops the revocation check,
which until now only storing another key could stop.
When this machine is activated with a valid key, its slot is freed on
the license server first (remove_license with release_slot). A release
that fails removes nothing; on network, server, rate_limit or
invalid_response the card asks whether to remove the key anyway, the
slot then staying occupied. no_active_activation, license_not_found and
license_revoked (recorded for the key sent) mean the slot is free.
- Rust: remove_license / remove_license_in, release_this_machine_slot,
this_machine_token_id, and the shared remove_activation_token_in
helper, now also used by store_license_in and the deactivation.
- Front: removeLicense service; performRemoveLicense in
useLicenseMachines (confirmations by state, error table, in-app log
lines); removing and removeError in the machines reducer, which lock
key entry, Activate and Deactivate; the button for any stored key,
valid or revoked.
- Docs: user guide, in-app tips, architecture, ADR 0017 amendment,
changelogs.
Resolves#370
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The import page without a source no longer shows a bare "no source found"
card. `ImportEmptyState` (built on the shared `EmptyState`) takes the place
of the empty `SourceList` in both situations: without an import folder it
offers "Choose a folder" as the single primary action; with a folder and no
bank sub-folder it offers "Create a sample folder" (primary, disabled while
in flight) and "Refresh" (secondary). Both variants, and the "?" help
popover through the new optional `linkTo` prop of `PageHelp`, link to the
bank CSV export guide at `/settings/users#import-export`. `SourceList`
stays an untouched pure list.
`useImportWizard` gains `createSampleFolders`: it invokes the Rust command
`create_sample_import_folders` with the folder and the webview's LOCAL date
(built from the local getters, not `toISOString()`), rescans the folder so
the two cards appear without another click, then raises a closable success
banner from the new `sampleCreated` state, which `reset` and a folder change
clear. A refusal from Rust (a sample folder already exists) lands in the
existing error banner. The log line carries the folder NAMES only, never
the absolute path, since the logs travel with a feedback report.
"Browse" on the folder card drops to the secondary style while no folder is
configured, so a single primary button is on screen. The reducer and its
initial state are exported as `wizardReducer` / `initialWizardState` and
unit-tested; `ImportEmptyState` is tested by direct call.
Resolves#356
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Add an optional `subsections` array to a user-guide section, rendered by
the new pure `DocsSubsections` component between the "How to" block and
the tips. Each entry has an id, a title, an optional italic status line,
an ordered list of steps and an optional trailing note. The ids are
registered in `sectionRefs` of `DocsContent`, so the existing hash
navigation (`/settings/users#import-export`) reaches the sub-sections
too. Only the Import section declares the key; the eleven other
sections render exactly as before.
The Import section gets six blocks in French and English: a generic
"export a CSV from your bank" block, then Desjardins, Tangerine, RBC,
National Bank and BMO with their verification status. The National Bank
and BMO blocks, which ask the user to send a header line through the
feedback form, carry the warning never to paste an account number, a
balance or a real transaction, in the JSON files and in the markdown
guide alike.
`docs/guide-utilisateur.md` receives the same six blocks in chapter 4,
a mention of the "Create a sample folder" button in its "How to", and a
"Quick start" in chapter 1 rewritten as the six steps of the
getting-started checklist, same order and wording as
`onboarding.checklist.items.*`.
`DocsSubsections.test.tsx` calls the component directly (no jsdom):
null for a section without sub-sections, one block per entry with its
id and ref registration, status line and note rendered only when
present, malformed entries dropped.
Resolves#355
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A profile without any transaction now opens a dashboard that says what to
do: a welcome card with the expanded getting-started checklist and one
primary action towards the import page, instead of widgets showing 0 $.
With transactions, the compact checklist sits between the title and the
filter panel until it is complete or dismissed.
- `EmptyState` (pure, dashed card from the import source list; a `to`
action renders a react-router `<Link>`, an `onClick` action a button)
- `OnboardingChecklist` (pure, expanded and compact modes; undone rows
link to their route, the locked Budget row shows a lock, the "Base and
up" label and links to the license card; neutral budget row and hidden
counter until the entitlement is known)
- `DashboardEmptyState` composes both
- `DashboardPage` branches on the hook `status`: loading renders the title,
help and banner only; error falls back to the v0.15.0 page without the
list and logs a warning; ready with zero transactions renders the empty
state outside the `isLoading` veil
- `useOnboardingChecklist` exposes `counters` and `error` for the page
- Users settings: "Show the getting-started checklist" button in the Guide
section, visible only when the preference is set, with an inline
confirmation after the click
- FR + EN keys `dashboard.empty.*`, `onboarding.checklist.*`,
`settings.users.onboarding.*`
Tests: `EmptyState.test.tsx` and `OnboardingChecklist.test.tsx` by direct
call (FilterPanel pattern). No DB migration. CHANGELOG left to #357.
Resolves#352
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- A state file that cannot be written now has a test on both of its paths:
the attempt (nothing is sent, or a read-only data directory would send a
request at every start) and the verdict (the key is not reported revoked
when nothing on disk says so). The first path was correct but unguarded:
the review's mutation left all 185 tests green.
- The storage outcome no longer claims that nothing was sent: it also covers
a verdict that could not be written. Reworded in licenseService.ts, the
in-app log line and docs/architecture.md.
- The Updates card names a revoked key in its Free branch, between the
message and the CTAs: a refunded Base buyer first meets the loss of
automatic updates there (Max, 2026-10-03). The error page stays as it is.
- A revoked key keeps being checked once per 24 h while it stays stored, so
that a correction made on the license server is picked up (Max,
2026-10-03). Declared in the user guide, the in-app docs, the changelogs
and the ADR 0017 amendment.
Refs #365
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A refunded license was revoked on the server but kept working in the app:
the edition is resolved offline from the key alone, and the flag added by
#347 lasted the session only and never touched the edition.
Rust
- license.check, next to the key, holds what the license server last said
about it: {key_sha256, attempted_at, revoked}. Never the key itself. A
missing, unreadable or invalid file, or a state about another key, reads
as "no state": not revoked, check due.
- entitlements_from_dir resolves a revoked key to ("free", []), which also
locks auto-update. read_license and store_license report the state.
- check_license_revocation: POST /v1/licenses/verify with the product and
the key only. Nothing is sent without a stored key that validates, nor
within 24 h of the last attempt, which is written before the request.
Fail-open: only "valid" lifts the state, only "revoked" sets it.
- Activation, machine list and deactivation record a license_revoked answer
under the key they sent.
- fetch_price reads error.code of a 403 and names license_revoked instead of
premium_required. It records nothing: the price route judges the license
of the activation token, which the client cannot tie to the stored key,
and 0.15.0 left the token of a previous key next to a new one (#367).
Front
- LicenseContext takes the revoked state from Rust (info.revoked); the
session flag and markRevoked are gone. The check starts once per app
start, writes its outcome to the in-app log, and reloads the context only
when the state changed. A revoked key entered again stays Free.
- UpsellGate and the License card name the revocation.
Docs: ADR 0017 amendment (D13 replaced, the first unsolicited request and
its bounds), architecture, user guide, price contract annex, changelogs.
Refs #365
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Activation sent `machine_uid::get()` as is: /etc/machine-id on Linux,
MachineGuid on Windows. machine-id(5) calls that id confidential and asks
applications to send a keyed hash under a fixed, application-specific key
instead. The license server stores what it receives next to the license
email and the host name, lists it back and signs it into the activation
token.
- derive_machine_id: HMAC-SHA256 under a frozen key, 64 lowercase hex
characters, pinned by two reference vectors. An empty OS id is refused,
never hashed.
- Activation sends the derived identifier and requires the issued token to
carry it. Nothing else originates a machine identifier.
- A machine activated before this change stays activated: a valid token
whose claim is the raw id of this machine still reads "Activated" (D1).
- The machine list flags `is_this_machine` in Rust, for a row under either
identifier (D3). `ActivationStatus` no longer carries an identifier and
the unused `get_machine_id` command is removed: no command hands the OS
id to the webview any more.
- After a deactivation the local token is dropped when it stood for the
freed slot: any row of this machine takes it, except the old raw row
while the token stands for the derived one.
- ADR 0020 records the derivation, the transition and the condition for
removing the raw-id compatibility.
Behaviour changes beyond the issue text: the machine list and a
deactivation no longer fail on an unreadable OS id (best effort), the
activation status then reads "not activated" instead of failing, and the
unused `store_activation_token` command refuses a token issued for the
raw id.
No new dependency (hmac and sha2 were already declared); Cargo.lock is
untouched. Rust 151 -> 168 tests, vitest 1311 -> 1314.
Refs #350
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Key entry and machine activation can no longer overlap. An activation
in flight writes the token of the key it read: a key stored meanwhile
ended up next to the previous key's token, the dead end 3f90635
closes. "Enter a key" and the form's submit are disabled while an
activation runs (LicenseKeyForm gains a busy prop), and "Activate"
while a key is being stored.
- The "Activated" badge is hidden for a revoked key: the server
deactivated every machine of the license.
- ADR 0017: the #347 amendment also points at section 1, which still
mentions the machine-binding downgrade.
Refs #347
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- store_license_in drops activation.token when the stored key changes.
The token names the previous license to the price server (its sub is
the license id, the key carries the email), so the card showed the
machine as activated while prices were refused for the old license.
The same key entered again keeps its token; a refused key changes
nothing.
- get_activation_status goes through activation_status_in(dir,
machine_id, key), tested in a temporary directory: a missing,
expired, foreign-machine, foreign-key or unreadable token reads as
not activated. It alone decides "Not activated" and "Activate".
- LicenseCard is keyed by licenseIdentity(info): another key remounts
the body, which re-reads the activation and drops the previous key's
machine list.
- invalidSignature asks to check the copy first. jsonwebtoken checks
the signature before decoding the payload, so a damaged copy often
reads as a signature failure (characterization test). User guide and
changelogs aligned.
- Render tests: the other errors stay visible under Machines, and the
edition's green check gives way to an alert for a revoked key.
Refs #347
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Rust (license_commands.rs)
- LicenseError gains InvalidPrefix, InvalidSignature, Malformed and
UnknownEdition. validate_with_key returns it (ExpiredSignature maps
to LicenseExpired), and store_license, read_license and
validate_license_key reject with the same JSON as the network
commands. store_license_in and read_license_in take a directory, so
the Storage mapping is tested at the source.
- D12: the edition comes from the license key alone.
resolve_license_entitlements no longer takes the activation token,
and current_entitlements reads only license.key
(entitlements_from_dir). A token that had expired (2-year server
lifetime) or came from another machine (restored data) used to drop
a valid key to free, while a key copied without its token kept its
edition. get_activation_status and persist_activation_token keep the
strict token validation, and the key keeps its strict validation
(CWE-613).
Front
- LicenseCard names the load error, and LicenseKeyForm (extracted so a
static render reaches it) names a refused key, through
parseLicenseError: no raw backend string reaches the card.
- D13: a license_revoked answer is recorded in LicenseContext for the
whole session, because the card unmounts when the user leaves
Settings > Users. Only a different key clears it. Card-level
message, alert icon, Activate disabled through selectCanActivate.
- Machine counter n/limit, "Not activated", activating and
deactivating labels, dates in fr-CA/en-CA, and "No expiry date"
beyond 50 years (licenseExpiry.ts, for the 100-year keys of
maximus-api#63).
- license.removeLicense and license.machines.activateError removed;
the price authFailed message points to activating the machine.
Tests: 15 new Rust tests (resolution from a data directory, named
variants, the 100-year key of #363, a key without exp) replace 3
machine-binding tests; vitest covers the card and form renders, the
context revocation, the hook wiring and the locales.
test: reproduces #347 (an expired token of this machine resolved a
valid Base key to free on 5d549d6).
Docs: CHANGELOG FR/EN, guide section 12 and in-app docs,
architecture.md, ADR 0017 amendment for #347, qa-update-cycle.md,
api-contract-prices.md.
Fixes#347Fixes#360
Refs #363
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Render tests for the upsell CTAs (UpsellCtas.render.test.tsx): the
reviewer's probe, which needs no jsdom (react-dom/server in the node
environment, plus the FilterPanel.test.tsx pattern of calling a
component as a function). It pins the Base/Premium CTA on UpsellGate,
the router guard of HaveKeyButton, the localized product URL, the
Premium note and the onNavigate forwarding, none of which the suite
guarded before.
- A failure to open the browser (openUrl) is now logged through
logError in PurchaseButton, DownloadLatestButton and LicenseCard,
instead of vanishing as an unhandled rejection that never reaches the
in-app logs. Tested for both shared buttons.
- upsellCtaFor: comment the trap in making Premium purchasable, since
PurchaseButton sells Base only.
- ADR 0017 amendment: the Account card text holds in practice only;
current_entitlements still grants Premium to an active subscription,
a dormant path until a subscription is sold.
- User guide and in-app docs: the purchase step now comes before the
key entry, and the Balance button is named "Get Premium".
- CHANGELOG: "Maximus Account" in English, "every screen that requires
it" in both files (the Balance screen sells nothing), and the French
elision before a guillemet.
Refs #346
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- upsellCtaFor(tier) decides what a locked screen offers: Base is
purchasable, Premium stays disabled with "Premium isn't sold online
yet". Pure and tested on the whole entitlements matrix.
- Shared CTAs, one component per file: PurchaseButton ("Get Base") and
DownloadLatestButton open the localized product page (purchaseUrl) and
need no router; HaveKeyButton renders only inside BrowserRouter.
- UpsellGate uses them; the purchase link never calls onNavigate, so
modal hosts stay open. ProfileFormModal reuses UpsellGate instead of
its compact panel, keeps its Cancel button, and closes after "I
already have a key" (onNavigate={onClose}).
- In Free, the Updates card offers Get Base, I already have a key and
Download the latest version; the error page (outside the router)
offers Get Base and the download link. No update check, no network
call.
- i18n FR/EN: Account card text, Premium note, Updates notEntitled text,
download label, editions guide step and tip; the "coming soon" note
key is gone. Tests pin the upsell key set and the decided texts.
- Docs: ADR 0017 amendment, architecture (UpsellGate row, shared CTAs,
upsellCtaFor, multi-profile row, counts), user guide section 12;
CHANGELOG FR/EN.
Proven red: Premium made purchasable 2, balance sold as Base in the
matrix 4, the old note key back in a locale 1, Account text altered 1,
download label altered 1.
Fixes#346
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- The idempotent-deactivation test now pins the route's other 404:
license_not_found stays an error. The previous negative case was a
403 that the deactivate route never returns, so swallowing
license_not_found (an unknown key shown as deactivated, the local
token deleted) went unnoticed.
- A test deactivates this machine and checks that the re-read activation
status brings the Activate button back. Removing that re-read used to
leave the suite green.
- The Activate button stays disabled while the list loads
(selectCanActivate), the counterpart of selectCanDeactivate: a verify
answer landing after a successful activation can no longer mark as
fresh a list that misses this machine.
- CHANGELOG: the old /simpl-resultat address is redirected by the site
since la-compagnie-maximus#153, so the "Buy" bullet now says the
button opens the product page directly, in the app's language. The
test comment is moved to the past tense.
Proven red on the fixed tree: idempotence swallowing license_not_found
1, no status re-read after deactivation 1, Activate live during a list
load 1.
Refs #270
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A 404 without a known code (missing route, proxy error page) is now
pinned as a server error by two table rows, so "key not found" can
never be shown for it.
- The message-key test spells out the expected key of every code
instead of comparing the map with itself, and checks the keys are
distinct: swapping two entries now fails.
- Idempotent deactivation moves into deactivate_idempotent, without
AppHandle, tested against a mock server (404 no_active_activation ->
done, 403 revoked -> error).
- Deactivate buttons stay disabled while the list reloads
(selectCanDeactivate), so a machine deactivated during a reload
cannot reappear.
- The rate-limit message uses i18next plural forms (rateLimit_one /
rateLimit_other with count): no more "1 seconds".
- CHANGELOG: drop the bullet about the edition updating after an
activation. The edition does not change with or without an
activation token, so nothing is observable; refresh() stays.
Proven red on the fixed tree: 404 without a known code read as
LicenseNotFound 1, license_expired mapped to the revoked key 2,
idempotence removed 1, buttons live during a reload 1, {seconds}
instead of {count} 2.
Refs #270
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Activation, deactivation and verify POST to /v1/licenses/* with
"product":"simpl-resultat" instead of the legacy /licenses/* paths,
which cost a 308 on every call.
- New LicenseError enum, serialized as {code} like FetchPriceError and
read from error.code of the /v1 envelope. A 200 {valid:false} from
verify is now a coded refusal instead of an empty machine list, and an
HTML error page on a non-2xx maps to server instead of
invalid_response. Deactivation is idempotent: no_active_activation
counts as done.
- The three calls live in *_inner functions without AppHandle, tested
against a mockito server that only declares the /v1 routes.
- useLicenseMachines hook with an exported reducer. The activation error
survives the list load it triggers (machine_limit_reached opens the
list), a deactivation removes the machine locally without re-running
verify (4 requests on the machine-limit path, under the server's
5/min/IP limit), and refresh() follows every successful activation or
deactivation.
- license.errors.* in FR and EN; purchaseUrl() opens
/{fr|en}/produits/simpl-resultat.
test: reproduces #270. Each original defect, reintroduced on the final
tree, turns tests red: legacy activate path 5, missing product 2,
envelope read as a string 3, verify valid:false as an empty list 2,
strict body parse on a non-2xx 2, untrimmed key 1, list load clearing
the activation error 4, verify re-run after deactivation 2, empty state
despite a list error 1, no refresh after activation 3, old purchase
URL 4.
Fixes#270
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Exporting then re-importing data destroyed every import configuration:
dataExportService serialised only categories, suppliers, keywords and
transactions, then ran DELETE FROM import_sources on restore and replaced
them with a synthetic 'Data Import' source. After restoring a backup, every
source had to be reconfigured by hand.
- Serialise import_sources and import_config_templates into the envelope,
with an explicit format_version; a file without one is the earlier format
and its missing arrays are treated as empty.
- Wrap wipe + restore in withTransaction, which the service had nowhere:
a constraint violation mid-restore used to destroy financial history with
no rollback.
- Restore templates BEFORE sources (template_id is a foreign key), upserting
by name and remapping template_id through the resolved ids, so restoring
into a profile that already has templates no longer hits UNIQUE(name).
- Whitelist amount_mode and sign_convention at the import boundary with a
readable message rather than an SQLite constraint error.
Resolves#331
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two failure modes, both anchored on the header row.
A KNOWN BANK IS NOW READ BY NAME. `bankSignatures.ts` declares the
documented export layout of Desjardins, RBC, Banque Nationale and
Tangerine as a set of normalized header labels plus a delimiter and a
preamble quirk. The table is evaluated BEFORE the generic dictionary and
an unknown file falls straight through to it, unchanged.
The signatures are not decorative. The generic dictionary matches
keywords as substrings, one role at a time, which reads two of these
four layouts wrong — both frozen as counterfactual test pairs, same
rows, header renamed:
- Tangerine writes `Date,Transaction,Name,Memo,Amount`. `Transaction`
is a description keyword, so every row of the file was labelled with
its direction word instead of the merchant.
- RBC writes its amount column `CAD$`, which no amount keyword
matches, next to a nearly empty `Cheque Number`. Those two are
sparse-complementary, so the shape scan paired them as debit/credit
and the one row carrying a cheque number imported as -247.95 instead
of -6.95.
A signature stays a set of PREFERENCES all the same: they are written
from documented layouts, without real statements, so every hint is
dropped the moment the data contradicts it. The single exception is the
amount mode, which outranks the sparse-complementary scan — nothing
inside an RBC file can tell that pair from a genuine one — and even that
is refused unless the declared columns are candidates the shape scan
proposed. Failing degrades to the generic path; it never breaks.
FORMAT DRIFT IS NOW REPORTED INSTEAD OF IMPORTED. Every successful
import records the normalized labels of its header row in
`import_sources.header_signature`, as a JSON array and not a hash: the
panel has to be able to name the columns that moved. On the next import,
a header that normalizes differently opens a `FormatDriftPanel` above
the preview — column by column, `Montant : 3 -> 4` — with the two
outcomes that exist: adopt the re-detected format, or keep the stored
one. A cosmetic rename (`Montant` -> `MONTANT ($)`) normalizes
identically and says nothing.
A source whose file has no header row keeps `header_signature` NULL and
drift detection is inoperative on it. Documented, not worked around:
a signature invented from the data would fire on every import.
THE REPAIR PATH IS NOW IN THE INTERFACE, in the drift panel and beside
the preview's sign flip. `findDuplicates` matches on date AND
description AND amount, so re-importing a file "now that it reads right"
does not correct the rows already written — it doubles them, and a
flipped sign produces mirror pairs that net to zero in every report. The
only safe path is deleting the faulty import from the history first.
The drift re-detection reuses `detectFormatForFile`, so there is still
exactly one detector; the static guard on its caller count moves from
two to three deliberately. Its score and bank badge are dropped straight
after: they measure the format the panel offers, not the one in use.
Resolves#330
A confidence score reports how many rows were READ, never what they say:
the `all-positive` fixture scores a perfect 100 % while every credit is
imported as an expense, because each of those rows is perfectly readable.
Nothing between that score and the database looked at the signs — the
preview was an optional modal of 20 rows with no totals, and the final
confirmation listed the delimiter and the date format but neither the
amount mode nor the sign convention.
The `file-preview` step had been declared in `ImportWizardStep` since the
beginning and no dispatch ever aimed at it. It is a real step now,
traversed at every import and gated by nothing — in particular not by the
detection score, which is sign-blind by construction.
- `useImportWizard`: `parseAndPreview` parses and stops at the preview,
replacing `parsePreview` and the `parseAndCheckDuplicates` that jumped
straight to the duplicates ("skips preview step"); `checkDuplicates`,
dead code until now, is the preview's next button, so the rows the user
validated are the rows that get checked.
- `summarizeParsedRows`: the recap, pure and tested — outflows and their
total, inflows and theirs, rows in error. Totals stay SIGNED, since
magnitudes would hide the one thing the recap exists to expose. Computed
over the whole file, never over the twenty rows displayed.
- `flipSignFormat` + "Inverser les signes": the correction lands on the
CONFIGURATION, so it is persisted with the source and the next file from
that bank reads right on its own. In debit/credit mode it swaps the two
column indices rather than toggling a convention `mapRow` ignores there,
where a toggle would have been inert.
- `ImportConfirmation` states the amount mode, the sign convention (in the
mode that applies it) and the column mapping, named by header.
- `FilePreviewModal` removed: it was the redundant surface, and editing
the table alone would have mutated a still-live copy of it.
The `all-positive` KNOWN DEFECT marker is dropped rather than deleted. Its
three original expectations still hold — an unsigned file carries no
direction and detection cannot invent one — and two cases were added: the
recap tell (six outflows, zero inflows) and the honest limit, that
flipping this particular file only produces its mirror image.
1088 vitest (1054 before), tsc and vite build clean. No DB migration.
Resolves#329
Detection handed back a configuration it had never tested, and only ever
ran behind the magic-wand button. A source opened for the first time
therefore started on `defaultConfig` — `;`, `DD/MM/YYYY`, columns 0/1/2 —
plausible enough to import a whole file wrong rather than fail visibly.
`detectImportFormat` now REPLAYS what it just decided over every data row
of the file and returns the rate as a `DetectionScore`. The replay runs
`mapRow`, the same pure function `parseFilesInternal` runs at import time,
under the same column-level decimal arbitration: two mappers would be the
exact divergence this chantier removes — a score reading 100 % while the
import wrote different amounts. A test asserts the two agree row for row
on every fixture of the corpus.
The threshold is 90 %, and it only colours the banner. Below it the panel
warns and prints the detailed count ("132 of 150 rows read"); at or above
it the banner is neutral. Nothing is blocked, because a perfect score says
nothing about the SIGN of what was read — `all-positive` scores 100 %
while every credit imports as an expense — and the preview step (#329) is
the real net, traversed at every import.
Detection now also fires on its own, guarded on `!existing`: a source that
has never been configured. A source that HAS one is never re-detected, the
stored format wins. The condition is deliberately not `!restored` — a
stored format that fails to decode already reports its own error, and
detecting over it would replace that message with a silent guess.
The button and the automatic run share one `detectFormatForFile`, so the
button replays detection instead of running a second, drifting variant of
it. The score is cleared when its source changes, when the format is
edited by hand (compared through the codec, so a rename keeps it) and when
a template overwrites the format — a banner vouching for a configuration
nobody measured is the misinformation it exists to remove.
Finally, the sign-convention selector is hidden in debit/credit mode.
`mapRow` computes `credit - debit` on magnitudes there and never reads
`signConvention`, so the control changed nothing. Hidden, not reset: the
stored value is left untouched.
Tests: 1054 vitest (+20), build and cargo check green. No DB migration.
CHANGELOG and docs are centralized in link 10 of the stack per the plan.
Resolves#328
Three ways an imported amount could be silently wrong, all of them passing
validation, all of them fixed here.
The two-column rule was `isNaN(credit) ? -debit : credit`, so the credit always
won. Many banks write `0,00` in the unused column rather than leaving it empty,
and `isNaN(0)` is false -- every debit of such a file imported as 0,00 and the
expense simply vanished, with no error anywhere. The rule is `credit - debit` on
magnitudes now, which needs no special case for a `0,00` cell (zero is the
identity of the subtraction) and implements the documented convention even when
an export negates its debits. A row unreadable in BOTH columns is an error
instead of a free 0,00 transaction.
`parseFrenchAmount` ended on `parseFloat`, which returns the longest valid
PREFIX instead of rejecting. Measured before the fix: `"50,00-"` -> 5000,
`"1 234,56 CR"` -> 123456, `"100,00 CAD"` -> 10000. A factor-100 error, and it
passes `isNaN`, so those rows counted as VALID everywhere downstream -- which
would have defeated the signed preview (#329), the safety net of the whole
chantier. Validation is anchored over the whole normalized string now and any
residual character yields NaN.
NaN, not a rescued magnitude, for a trailing `CR`/`DB` or currency code. Two
reasons: `CR`/`DB` carry a DIRECTION, so returning a magnitude for both would
trade a loud failure for a silent SIGN error (the D/C-indicator shape is refused
upstream by design, #328); and `"100,00 CAD"` is structurally identical to
`"2025 Montant"`, so whitelisting a trailing word to rescue the first re-blinds
`detectHeader` on the second. Two accounting forms ARE legitimate and supported:
parentheses `(50,00)` and a trailing sign `50,00-`.
The `?? 0` fallbacks read column 0 -- usually the date -- when the mapping was
incomplete. An unmapped amount column is an explicit row error now, reported
ahead of any per-row problem since it is a format error affecting every row.
`1.234` is 1234 in a French column and 1.234 in an English one, and no rule
applied to that cell ALONE can tell. `detectDecimalSeparator` arbitrates from
the decisive siblings of the column and `parseFrenchAmount` takes the verdict as
an option. Detection deliberately stays out of it: it runs before a column is
known to be an amount column at all, so the verdict is applied where the value
actually becomes a transaction.
The rule itself moves out of the hook as a pure `mapRow(raw, format)` in
`importFormat.ts`. That is what lets the corpus tests run the REAL rule -- the
hand-written mirror in `csvAutoDetect.test.ts` and the static guard pinning five
`parseFilesInternal` expressions are both deleted -- and what stops the
detection score (#328) and the signed preview (#329) each re-implementing it.
Hardening is global: the parser is shared by 11 call sites, 8 in
`csvAutoDetect.ts` and 3 in the holdings CSV import (#245), where a price cell
`150,25 CAD` used to store 15025. It is refused now and `buildDetailedLines`
raises on the empty price. An unreadable QUANTITY was worse -- coerced to 0, so a
zero-value position saved in silence; the draft keeps the offending text instead
and the existing `snapshot_priced_quantity_required` fires.
Row errors become i18n keys (`import.rowErrors.*`) rather than the raw English
literals rendered straight into the preview table, since this adds a
user-visible string. The report table also carries raw exception messages, so
both render sites resolve through `isRowErrorKey` and never feed `t()` anything
that is not ours.
Test churn, per link 1's handoff (update the expectation, drop the marker, never
delete the test): the three `#325` KNOWN DEFECT blocks in `amountParser.test.ts`
flip, plus `unused-column-zero` in `csvAutoDetect.test.ts`. One block tagged
`#328` flips too -- `header-numeric-label`, whose own comment reads "#328 adds a
lexical signal to detectHeader, and #325 anchors the parser [...] either fix
closes this". The anchored parser landed first. The other `#328` blocks
(`debit-credit-reversed`, `absolute-indicator`) and the `#329` block are
verified unchanged. CHANGELOG and docs stay centralized in the last link of the
stack, as the plan specifies.
989 vitest (963 before), tsc + vite build clean, cargo check clean. No DB
migration.
Resolves#325
The root bug of this chantier. `import_sources` carried no `amount_mode` and no
`sign_convention` until v17, so restoring a configured source re-inferred the
mode from `mapping.debitAmount !== undefined` and wrote
`signConvention: "negative_expense"` outright (useImportWizard.ts:321-323). A
credit-card statement configured for positive expenses came back on the default
convention at its second import and `parseFilesInternal` negated every amount:
expenses landed as income, with no error shown anywhere. The format is a read
value now, not a guessed one.
Two types and a codec, not one composed type. The four carriers are
structurally incompatible -- `ImportSource.has_header` is declared boolean,
`ImportConfigTemplate.has_header` is a number, `SourceConfig` is camelCase on a
parsed mapping -- so the guarantee cannot come from a shared shape. It comes
from `src/utils/importFormat.ts` being the single conversion point between
`ImportFormatRow` (persisted: snake_case, mapping as JSON, `has_header`
normalized to 0/1) and `ImportFormat` (domain), and from its completeness test.
That test is enforced on two levels, and both were mutation-checked:
`FORMAT_FIELD_PAIRS` is typed `Record<keyof ImportFormat, keyof
ImportFormatRow>`, so a field added to the format fails to BUILD until it is
listed; the test then compares each codec's real output keys against that table,
so a field listed but not wired fails the TEST. Dropping `sign_convention` from
`formatToRow` -- the shape of the original bug -- fails 14 tests.
`formatFromRow` validates rather than falls back. The v17 CHECK admits
`absolute_indicator` so the third amount mode ships without another migration,
but the app cannot map one: falling through to the `single` branch would read
the wrong column for every row, and anything other than `positive_expense`
would silently mean `negative_expense`. It raises an `ImportFormatError`
carrying an i18n key, and the wizard opens on a fresh configuration so
"reconfigure this source" stays an action the user can actually take.
Also here:
- The config write moves from `checkDuplicatesInternal` to `executeImport`, so
an import abandoned at the duplicate step leaves no configuration behind. It
is the only write point in the hook and a guard test holds that.
- Switching amount mode prunes the abandoned mode's columns, so the mode owns
the mapping rather than the reverse. The column the `<select>` merely displays
is deliberately not materialized -- #325 turns an unmapped amount column into
an explicit row error, and writing a 0 here would make it unreachable. The
mode and the pruned mapping land in ONE state update: the panel's handlers
each spread the same `config` prop, so two calls would see the same stale
value.
- `template_id` is recorded and restored as provenance only, never re-read as
format. `selectedTemplateId` is no longer blanked on every source selection.
An acceptance test rewrites a template end to end and asserts the linked
source reads identically, plus a non-vacuity check that the template really
changed.
- Both template writers go through the codec too, so a new format field cannot
reach one table and miss the other.
`parseFilesInternal` is untouched: link 1's static guard on its five pinned
expressions still passes. 39 new tests (963 vitest total, was 924), build clean,
`cargo check` clean, no migration.
Resolves#324
Document the edition-gating work (#297-#301):
- ADR 0017 (accepted): tier->features matrix, signed features[] override
fail-closed in Free (CWE-863), UI-only enforcement as an assumed GPL
soft-paywall (server-enforced price fetching stays the only hard gate),
non-destructive downgrade, dev-override behind an explicit Cargo
feature (CWE-489), rejected alternatives.
- architecture.md: new 'Gating par edition' section (entitlements matrix,
LicenseContext, useEntitlement, RequireFeature/UpsellGate, NavLock,
profileGate, Rust side), rewritten entitlements.rs section (auto-update
now Base+, stale 'open to free' note removed), gated routes listed in
the routing section, hooks table updated (useLicense removed in #297 ->
useEntitlement/useIsPremium), ADR index + header refreshed.
- guide-utilisateur.md + docs.editions.* i18n keys (FR/EN) wired into
DocsContent: new 'Editions' section with the Free/Base/Premium table,
unlock flow and non-destructive locking tips.
- CHANGELOG.md + CHANGELOG.fr.md: one global [Unreleased] entry listing
the modules now gated Base (Budget, Adjustments, advanced reports,
multi-profile, auto-update) and Premium (Balance), the visible-but-
locked upsell with disabled 'coming soon' purchase CTA, and the
data-preserving behaviour.
Resolves#302
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A Free user keeps full access to their active profile; profiles beyond
it show a lock in ProfileSwitcher and open an upsell dialog instead of
switching. Creating a profile beyond the first is locked at the single
creation point, ProfileFormModal (reached from both ProfileSwitcher and
ProfileSelectionPage), with a race guard in handleSave covering the
license boot window. Both creation entries stay visible with a lock
(locked-not-hidden). Nothing is ever removed from profiles.json — an
upgrade to Base/Premium makes every profile reappear untouched.
- New pure predicates in src/shared/profileGate.ts
(isProfileSwitchLocked, isProfileCreationLocked) + 10 vitest
- ProfileFormModal upsell panel reuses upsell.* keys WITHOUT UpsellGate:
the modal also opens from ProfileSelectionPage, which renders outside
BrowserRouter, where UpsellGate's useNavigate would throw
- UpsellGate gains an optional onNavigate callback so the
ProfileSwitcher upsell dialog can close itself after navigation
- No lock while the license is loading (anti-flash, ready guard);
zero new i18n keys; no DB migration
Resolves#300
Generated autonomously by /autopilot run of 2026-07-20
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Apply the tier gating to routes and navigation on top of the #298 UI
guard:
- App.tsx: pathless RequireFeature layout-routes grouping /balance,
/balance/accounts, /balance/snapshot under "balance"; /reports/
highlights|compare|category|cartes under "reports-advanced"; /budget
under "budget"; /adjustments under "adjustments". The /reports hub and
/reports/trends stay Free and ungated.
- NavItem gains an optional `feature?: FeatureKey`; set in NAV_ITEMS on
budget, adjustments and balance only — NOT on reports (Free hub).
- Sidebar: local NavLock child component (hook at component top level)
renders a lock badge only when the license is ready AND the feature is
not allowed — no locked flash at boot; items stay clickable and lead
to the upsell via the gated route. Tooltip/aria reuse nav.locked.
- ReportsPage hub: single useEntitlement("reports-advanced") call
drives a `locked` badge on the 4 advanced tiles via a new additive
HubReportNavCard `locked?` prop; the Trends tile is never locked.
- Pure contract test on NAV_ITEMS (gated trio present, reports/Free
items ungated, exactly 3 of 9 gated).
No new i18n strings (nav.locked shipped with #298), no DB migration.
Changelog centralized in #302.
Resolves#299
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add the reusable gating guard components on top of the #297 foundation:
- UpsellGate: full locked screen (lock icon, tier title, per-feature
description). Two CTAs: "Get <tier>" rendered VISIBLE but DISABLED with
an "online purchase coming soon" note (per planning decision — #270 will
activate it), and "I already have a key" navigating to /settings/users
(LicenseCard).
- RequireFeature: renders a neutral loader while the license is not ready
(no upsell flash at boot), then children or UpsellGate. Renders <Outlet/>
when children are omitted so it also works as a layout route grouping
all routes of one feature.
- requiredTierFor() pure helper in shared/entitlements.ts derives the
minimum unlocking tier from matrix membership (not array order).
- i18n: upsell.* (title, per-feature descriptions, CTAs) + nav.locked in
BOTH locales; tier labels reuse the existing license.editions.* keys.
- Tests: requiredTierFor mapping/minimality + upsell i18n coverage for
every FeatureKey in fr and en (the components themselves are not
testable without jsdom).
Resolves#298
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A rejected submitKey dispatched the same ERROR action as a failed boot
load, so the CWE-703 retry backoff armed on it and the auto refresh
(LOAD_START) cleared the "invalid key" message ~1s after submit —
LicenseCard has no local error state, the context is the only source.
Split the state: load lifecycle (status/error, retried) vs validation
(validating/validationError, never retried). VALIDATE_ERROR leaves
status untouched, so a ready license stays ready on a typo'd key (no
`ready` regression for gating consumers) and a boot-error retry loop
keeps running through a failed validation. Reducer + initial state
exported for tests, covered by LicenseContext.test.ts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Custom categories with no standard match were shown as read-only text in
the migration wizard and force-parented under a catch-all bucket. They now
get the same inline target picker as seeded rows: picking a standard leaf
merges the custom category — its transactions, budgets, keywords and
suppliers are reassigned to the leaf — and deactivates it. Leaving a custom
unmapped keeps the previous behaviour and never blocks the wizard.
- Reducer: RESOLVE_ROW resolves rows in both plan.rows and plan.preserved;
the Next-button guard still counts seeded rows only.
- Writer: the rewrite mapping now includes resolved preserved rows; the
catch-all parent is created only when a custom is left unmerged; merged
customs are deactivated instead of re-parented (shared isResolvedTarget
helper across the three sites).
- UI: the preserved block renders MappingRow instead of plain text.
- i18n (FR/EN) + CHANGELOG (FR/EN).
Tests: reducer (resolve a preserved custom, guard unchanged, GO_NEXT still
proceeds) + writer (reassign to the chosen leaf, soft-delete, no empty
parent when all merged, orphan-free merge of a custom parent with an
unresolved child). 836 vitest green, tsc + vite build clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the two hand-rolled Set-of-ids collapse state machines in the category
trees with the shared useCollapsibleGroups hook (a strict superset after #288),
keeping each tree's distinct recursive render and CategoryTree's drag-and-drop
untouched.
- CategoryTree (Categories page): storageKey null + defaultExpanded true, so
every parent opens with no seeding; drops the local Set + collectExpandable.
- CategoryTaxonomyTree + guide page: storageKey null + defaultExpanded false
(collapsed by default); exports a shared TAXONOMY_COLLAPSE_ACCESSORS.
- Fix the guide's button bug: allExpanded = expanded.size > 0 flipped to
"Collapse all" after opening a single node; now uses the hook's correct
allExpanded (every group must be open).
- Also migrate StepDiscover (4th consumer of CategoryTaxonomyTree, same button
bug) onto the hook for a green build and consistency.
Both trees pass a flattened node list to the bulk ops; behaviour preserved:
Categories opens expanded, the guide/wizard open collapsed.
Resolves#290
Generated autonomously by /autopilot run of 2026-07-15
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reverse #278's deliberate no-collapse decision for the budget grid: it now
folds/unfolds at every category level like the hierarchical reports, opening
fully collapsed with a one-click "Expand all".
- BudgetTable: wire useCollapsibleGroups (defaultExpanded: false), inline
BUDGET_COLLAPSE_ACCESSORS + BUDGET_EXPANDED_KEY (mirrors ComparePeriodTable /
BudgetVsActualTable — no budgetTableModel.ts). Chevron + aria-expanded +
aria-level on every parent row; groups.visible(group) before reorderRows.
- BudgetTable: section subtotal now uses the tested sumLeavesForType on the RAW
group (drop-in for the hand-rolled loop) so folding stays purely visual.
- BudgetTable: rename STORAGE_KEY to "budget-subtotals-position", decoupling the
subtotals-position preference from BudgetVsActualTable (they collided).
- useBudget: extract the pure buildBudgetYearRows(); the grid's rows are
level-order (BFS), not DFS — document the invariant and pin it in a test, since
the #288 ancestor-walk collapse is order-independent (the v1 plan assumed DFS
and would have broken here).
- Tests: useBudget.test.ts locks the level-order emission, the DFS-killer, the
end-to-end multi-level collapse on real builder output, and that subtotals sum
raw rows regardless of collapse. 828 vitest pass.
Resolves#289
Generated autonomously by /autopilot run of 2026-07-15
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Generalize the report category collapse from level-1-only to every hierarchy
level, on the three hierarchical report tables (real-vs-real Compare,
real-vs-budget Compare, Trends by category). Visibility is now decided by an
ancestor walk, not by row adjacency, so it is independent of row order (the
level-ordered budget grid emits a non-DFS order).
- collapsibleRows: rewrite visibleRows as an ancestor walk (a row is hidden iff
any ancestor is collapsed); add parentKeyOf + injective `p:` keys;
collapsibleKeys returns all parents (any depth); extract the pure, tested
isCollapsedFor polarity helper; MAX_TREE_DEPTH cycle guard.
- useCollapsibleGroups: persist in user_preferences (per-profile, destroyed with
the profile) instead of localStorage; storageKey nullable (no persistence);
options.defaultExpanded; async hydration (no flash); collapseAll(rows).
- 3 tables: fix BOTH gates (collapsed flag + button) isTopParent -> isParent, add
parentKeyOf accessors, aria-level on parent rows.
- Delete dead CategoryTable.tsx (0 imports).
- Tests: rewrite collapsibleRows.test.ts (BFS==DFS masking, cycle guard,
cross-section ancestor, "(direct)" leaf, polarity); extend overTimeTableModel
fixture to 3 levels with cascade assertions.
Collapse stays purely visual: subtotals and result lines are computed from raw
rows, never from visible rows.
Resolves#288
Generated autonomously by /autopilot run of 2026-07-15
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
DashboardPage now reuses the Cartes report's presentational widgets
(KpiCard with MoM/YoY deltas, top movers, budget adherence) sourced from
getCartesSnapshot against a Dashboard-owned reference month (defaults to
the last complete month). The expense-only pie chart is replaced by a
ranked bar chart of top expense categories (resurrecting the previously
unused CategoryBarChart), and the account (import-source) filter
introduced on Trends/Compare/Budget now also applies to the Dashboard's
own transactional widgets via a Dashboard-local accountIds state (kept
separate from useReportsPeriod, since the Dashboard owns its own two
temporal axes).
A new net-worth tile surfaces the Balance sheet's latest total
(getSnapshotTotalsByDate) — a distinct metric from every transactional
card here, so it stays hidden (never a misleading "$0") until at least
one balance account has a recorded snapshot, reusing deriveLandingState
rather than re-inferring emptiness from nulls. It is not scoped by the
account filter (balance_accounts is a disjoint concept from
import_sources) and is fetched independently on mount.
The category-over-time trend chart now passes typeFilter "expense",
fixing a latent mismatch where a revenue category could silently show
up in a chart titled "expenses over time".
Resolves#279
Align BudgetVsActualTable on the income-statement gold standard already
shipped for the real-vs-real compare report (#253/#256): flip TYPE_ORDER
to income-first (revenue -> expense -> transfer) and replace the flat
"Total" row with interleaved Result before transfers / Net result lines.
Roll-up logic extracted into a new pure, tested module
(budgetVsActualResults.ts) mirroring compareResults.ts, with one sign
difference: BVA amounts already arrive signed the accounting way
(expense actual/budget are negative), so the operating result is a
straight add of income + expense rather than a subtraction.
Resolves#277
Generated autonomously by /autopilot run of 2026-07-11
Align BudgetTable on the income-statement standard shipped for the
compare/trend reports: sections now read Income -> Expense -> Transfer
(useBudget's TYPE_ORDER and BudgetTable's typeOrder both flipped), and
the previously unlabeled grand-total row is replaced by two interleaved
result rows (Result before transfers / Net result), computed by a new
pure, tested module (budgetTableResults.ts) mirroring compareResults.ts's
shape. Roll-up covers the previous-year-actual, budgeted-annual, and
budgeted-monthly columns alike.
All categories remain displayed (the grid stays a full edit surface) --
no collapse, no empty-row toggle, matching this issue's frozen decisions.
Resolves#278
Mounts <FilterPanel> on ReportsComparePage (next to the existing
CompareReferenceMonthPicker) and BudgetPage (next to the existing
YearNavigator), keeping each page's temporal control unchanged. Threads
accountIds from useReportsPeriod through useCompare into
getCompareMonthOverMonth/getCompareYearOverYear, and through
CompareBudgetView into getBudgetVsActualData — closing the gap where
that sub-tab silently ignored the filter while the rest of the Compare
page respected it.
Budget: the issue named getBudgetVsActualData as the target for
useBudget, but that hook never calls it (it's exclusive to
CompareBudgetView/Dashboard/Cartes) — its only real actuals fetch is
getActualTotalsForYear(year - 1), the previous-year reference column.
Extended that function with the same optional accountIds pass-through
established by #273, rather than wiring in an unrelated call shape.
Both hooks fetch their account checkbox list via getAllImportSources,
mirroring the useTrends/#275 pattern. Empty selection = no filter,
byte-identical to pre-#276 output (regression-tested).
Resolves#276
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds src/components/reports/FilterPanel.tsx, the shared filter bar for the
report pages. It renders the page's own temporal control (PeriodSelector /
CompareReferenceMonthPicker / YearNavigator / …) as-is via a `temporalControl`
ReactNode prop, plus a checkbox multi-select over `accounts: ImportSource[]`.
No `temporalMode` enum — that design was rejected to avoid mixing state
sources; the panel owns no temporal state at all.
Empty `accountIds` means no filter (all sources). Selection toggling is a
pure, exported `toggleAccountId` helper. Copy says "sources"/"import
sources" everywhere, never "comptes"/"accounts", so the filter reads as
distinct from the Bilan module's own "Compte" vocabulary.
This issue creates the standalone component only; wiring it into report
pages is left to follow-up issues (#275/#276).
Resolves#274
Renders the trends-by-category table from the #264 id-keyed tree as an indented
parent/child hierarchy (parity with ComparePeriodTable): top-level parents carry
a chevron and fold their subtree down to a subtotal, with an "expand all /
collapse all" button. Collapsed by default; expansion state is persisted under a
trends-specific localStorage key (reports-trends-expanded), distinct from the
comparable tables. The "result before transfers" line is interleaved before the
transfers section instead of sitting at the bottom.
Collapse is purely visual: section subtotals, before/net results and totals come
from computeOverTimeResults over the raw tree, never the visible rows.
New pure module overTimeTableModel.ts (section grouping + collapse accessors)
keeps the component thin and unit-testable without a React render harness;
overTimeResults.ts is left untouched. 8 new tests; build + 728 vitest green.
Resolves#265
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds an id-keyed hierarchical `tree: OverTimeRow[]` sidecar to
getCategoryOverTime, built via the generic buildLeafDrivenTree (#263) as
buildOverTimeTree — leaf-driven, income-first, no top-N / no "Other" bucket.
The name-keyed pivot (data/categories/colors/types/categoryIds) is left
BYTE-IDENTICAL, so the Trends chart and the dashboard render unchanged.
computeOverTimeResults now consumes the id-keyed tree LEAVES (never the
`is_parent` subtotals) grouped by each leaf's category_id-resolved type, so
the section subtotals and the Result-before/net lines are exact: two homonym
categories of different types no longer collide, and a non-top-N income or
transfer category is no longer lumped into "Other" as an expense.
CategoryOverTimeTable renders the tree leaves (every category, id-safe)
instead of the top-N pivot; the chart keeps reading the top-N-capped pivot so
its stacked series stay bounded. OverTimeRow mirrors CategoryDelta's snake_case
hierarchy block (parent_id/is_parent/depth/category_type) so it composes with
collapsibleRows / useCollapsibleGroups for the #265 hierarchy work.
Tests: rewrote overTimeResults.test.ts onto the tree (homonym regression +
leaves-only-not-parents); added buildOverTimeTree suite (nesting, income-first,
grand-total invariance, orphan, A->B->A cycle depth guard) and a
getCategoryOverTime tree-wiring test proving the pivot stays top-N+Other while
the tree carries every category. 720 vitest green, build + tsc green.
Resolves#264
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The two hierarchical comparable reports — real-vs-real Compare and
real-vs-budget — now let the user collapse or expand each top-level
category's sub-categories. Groups start collapsed by default (#260): only
the parent's subtotal row shows until the user expands it, and each expanded
group is remembered per report.
- New pure module utils/collapsibleRows.ts (visibility filter, group-key
extraction, expanded-set (de)serialization) + useCollapsibleGroups hook
wrapping the localStorage-persisted expanded set. Persisting the *expanded*
set (not the collapsed one) makes "all collapsed" the zero/default state.
- A chevron toggles each top-level parent; an "Expand all / Collapse all"
button toggles them together. Section subtotals and result lines keep
summing every leaf, so collapsing never changes any total.
- Accessors mirror each table's own depth/parent logic so hidden rows are
exactly a group's indented descendants.
- i18n keys reports.collapse.{expandAll,collapseAll} (FR/EN); CHANGELOG.
CategoryOverTimeTable (Trends -> by category) is intentionally left out: its
rows are a flat top-N category list with no parent/child hierarchy to fold.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Apply the compare report's "result analysis" presentation to Trends -> By
category (table view). Categories are grouped into Income -> Expenses ->
Transfers sections with per-month and total subtotals; the old mixed "Total"
row (which summed absolute magnitudes into a meaningless figure) is replaced by
a Net result row per month (income - expenses + transfers) plus a Result before
transfers row shown only when transfers exist, both coloured by sign. Category
cells stay neutral levels.
- reportService.getCategoryOverTime: project COALESCE(c.type,'expense') in both
SELECTs and return an additive `types` map (built from the top-N rows, like
`colors`). Dashboard widget and CategoryOverTimeChart are untouched.
- shared types: add `types` to CategoryOverTimeData.
- new pure module overTimeResults.ts (computeOverTimeResults) with unit tests -
the per-month result reducer, mirroring the compare's pure Totals helper.
- i18n: add reports.compare.resultNet / resultBeforeTransfers (FR+EN); reuse the
existing sections.* and total* keys.
- .gitignore: anchor the autopilot `reports/` rule to `/reports/` so it no
longer swallows new files under src/components/reports/.
Section order is income-first (Revenus -> Depenses -> Transferts), per the
issue; the existing COMPARE_TYPE_ORDER is expense-first, so a local
OVER_TIME_TYPE_ORDER is used rather than reusing it.
Resolves#256
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Addresses /pr-review REQUEST_CHANGES on #255.
- useCompare: the "skip first sync" boolean was not StrictMode-safe — the dev
double-invoke of effects flipped the flag on setup #1, so setup #2 re-synced
the reference month to the civil-year December, re-introducing the very bug
Changement 2 fixes (dev only; prod has no double-invoke). Replace it with a
value-change guard: a ref seeded with the initial `to` plus a pure
syncReferenceOnPeriodChange() that only dispatches when `to` actually changes.
Idempotent across the double-invoke, and now unit-tested (5 cases) since the
decision is a pure function (the project has no renderHook harness).
- Remove the now-orphaned reports.compare.totalRow i18n key (both locales) — the
flat grand total it labelled was replaced by the result lines.
- ComparePeriodTable: gate the "before transfers" line on results.hasTransfers
(previously computed/tested but unused).
- ComparePeriodChart: show the no-data empty state when the expense filter
leaves nothing (a pure income/transfer period) instead of bare axes.
Build + 690 vitest green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "actual vs actual" compare was expenses-only (WHERE amount < 0), so revenue
categories were invisible — you could not tell a surplus from a deficit. Make it
an income statement (the product's namesake "résultat"):
- COMPARE_DELTA_SQL: broaden the WHERE and per-type CASE to include `income` as
a signed SUM (like `transfer`), so revenue credits survive the outflow filter.
Expenses stay ABS-of-outflows, byte-identical. Transfer netting (#243) intact.
- Section order is now income -> expense -> transfer (COMPARE_TYPE_ORDER).
- ComparePeriodTable: replace the now-meaningless flat grand total with two
result lines — "result before transfers" (revenues - expenses) and the net
"result" (after transfers) — extracted into a pure, tested compareResults
module. Delta colours are direction-aware (income/result up = green, spending
up = red); result amounts are coloured by sign (surplus/deficit).
- ComparePeriodChart stays a spending view: filter to expense leaves so revenue
bars don't mix into the same axis.
- useCompare: skip the initial period-sync so the compare opens on the previous
(last complete) month instead of the civil-year December that useReportsPeriod
yields by default.
Also anchor the `reports/` gitignore to `/reports/` — the unanchored rule was
silently ignoring new files under src/components/reports/.
Tests: new compareResults.test.ts (result roll-up, unbalanced transfer, deficit,
subtotal exclusion); reportService.test.ts updated for the broadened SQL, the
income bucket rule, and income-first section order. Build + 685 vitest green.
Resolves#253
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
